01

2024-01

How to make carbon steel pipe?

The raw material for carbon steel pipes is round tube billet. The round tube billet must be cut by a cutting machine into a billet with a length of about 1 meter and sent to the furnace for heating via a conveyor belt. The billet is fed into the furnace and heated to a temperature of approximately 1,200 degrees Celsius.

How to make carbon steel pipe?

01

2024-01

Stainless steel rod production process

Raw material processing: First, select high-quality stainless steel blanks as raw materials and conduct quality inspections to ensure that the raw materials meet the requirements. The raw material is then heated to remove impurities and bubbles inside it.

Stainless steel rod production process

01

2024-01

Types and specifications of angle steel

It is mainly divided into two types: equilateral angle steel and unequal angle steel. Among them, unequal angle steel can be divided into two types: unequal sides and equal thickness and unequal sides and unequal thickness.

Types and specifications of angle steel

01

2024-01

Cold rolled steel processing methods

Cold rolled steel is steel produced by cold rolling. Cold rolling is to further thin the No. 1 steel plate to a target thickness under room temperature conditions. Compared with hot-rolled steel plates, cold-rolled steel plates have a more precise thickness, smooth and beautiful surface, and have various superior mechanical properties, especially in terms of processing performance.

Cold rolled steel processing methods

01

2024-01

Inspection of steel bars and process inspection of steel bar joints

When inspecting steel bars, the first thing to do is to check the brand number and quality certificate of the steel bars; secondly, to check the appearance, take 5% of the steel bars from each batch, and check that there should be no cracks, wounds or laminations on the surface, and the bumps on the surface of the steel bars should not exceed the horizontal limit.

Inspection of steel bars and process inspection of steel bar joints
< 12 >